Ciao, please try the 2.5.7 firmware (here)kencyclingnyc wrote: ↑Wed Mar 22, 2017 1:37 pm Hi Simone-
I am experiencing several issues around the newly released firmware that I wanted to share-
1) The PC8 battery seems to drain faster with the new software. As a point of reference, I am wirelessly uploading to two URL's (i-training Peaks and ii- Strava). Most rides are under two hours and the battery burn rate is between 10-20% per ride).
2) HR readings are all over the place; I replace the battery in my SRM strap think it was a dead battery but today was no different
3) increased wattage dropouts - My rides are the same everyday; my home (NYC) to Central Park, do laps and ride home... same streets every day. Since updating, I have bee getting a lot more drops then previously; in fact I've gotten the - - for 15-30 second.
I hoping that this info is helpful and am happy to help work through it and even if it means going back to the old firmware as a proof of concept.
Best wishes,
Ken
New Features - Nuove Caratteristiche
Re: New Features - Nuove Caratteristiche
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer
Responsabile SRM Italia - Software Developer
Re: New Features - Nuove Caratteristiche
Thanks Mike but I don't know this problem. Have you any video/images to show?mminard wrote: ↑Fri Mar 31, 2017 1:55 pm Has anyone reported any "glitches" with the latest device agent? I'm running the software on two different computers (both latest MacOSX) and one has exhibited odd behavior. The screen will flash and jump between different screens. Is there any information you want from that install before I uninstall and re-install the software?
Mike
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer
Responsabile SRM Italia - Software Developer
Re: New Features - Nuove Caratteristiche
No but I'll be sure and use it tomorrow and I'll record the screen while I'm using it and will report back if it does.simone wrote: ↑Fri Mar 31, 2017 2:14 pmThanks Mike but I don't know this problem. Have you any video/images to show?mminard wrote: ↑Fri Mar 31, 2017 1:55 pm Has anyone reported any "glitches" with the latest device agent? I'm running the software on two different computers (both latest MacOSX) and one has exhibited odd behavior. The screen will flash and jump between different screens. Is there any information you want from that install before I uninstall and re-install the software?
Mike
Re: New Features - Nuove Caratteristiche
english please.
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer
Responsabile SRM Italia - Software Developer
-
- Posts: 2
- Joined: Sun Feb 12, 2017 10:20 pm
Re: New Features - Nuove Caratteristiche
Hi,
is anyone having issues with Strava Upload from PC8DA (build : V2.5.225 Build 201703151550) too ? I have to re-enter my Strava Login each time i quit PC8DA.
Geoffrey.
is anyone having issues with Strava Upload from PC8DA (build : V2.5.225 Build 201703151550) too ? I have to re-enter my Strava Login each time i quit PC8DA.
Geoffrey.
Re: New Features - Nuove Caratteristiche
Sorry but... do you save into the PC8?Yefrifotos wrote: ↑Thu Apr 06, 2017 8:40 pm Hi,
is anyone having issues with Strava Upload from PC8DA (build : V2.5.225 Build 201703151550) too ? I have to re-enter my Strava Login each time i quit PC8DA.
Geoffrey.
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer
Responsabile SRM Italia - Software Developer
Re: New Features - Nuove Caratteristiche
HI,
I have problems setup Facebook to my PC8, Are using the newest FW 2.5.7.
I had worked before, so I have try doing the same workaround as has ben used when problems with TP.
As you can see it looks in DA as it is enabled for FB, but in the PC8 it says it is disabled and I have try many times
and each time I have press save to the PC8 and after that disconnected the PC8.
And each time I upload setting again the FB connection is remove.
I have problems setup Facebook to my PC8, Are using the newest FW 2.5.7.
I had worked before, so I have try doing the same workaround as has ben used when problems with TP.
As you can see it looks in DA as it is enabled for FB, but in the PC8 it says it is disabled and I have try many times
and each time I have press save to the PC8 and after that disconnected the PC8.
And each time I upload setting again the FB connection is remove.
You do not have the required permissions to view the files attached to this post.
Re: New Features - Nuove Caratteristiche
HI,RasmussM wrote: ↑Tue Apr 25, 2017 5:52 pm HI,
I have problems setup Facebook to my PC8, Are using the newest FW 2.5.7.
I had worked before, so I have try doing the same workaround as has ben used when problems with TP.
As you can see it looks in DA as it is enabled for FB, but in the PC8 it says it is disabled and I have try many times
and each time I have press save to the PC8 and after that disconnected the PC8.
And each time I upload setting again the FB connection is remove.
Updated DA to V2.5.227 and screen dump upload to Facebook is working again.
Nice work Srm dev. Team.
Re: New Features - Nuove Caratteristiche
RasmussM wrote: ↑Sun May 28, 2017 7:39 amHI,RasmussM wrote: ↑Tue Apr 25, 2017 5:52 pm HI,
I have problems setup Facebook to my PC8, Are using the newest FW 2.5.7.
I had worked before, so I have try doing the same workaround as has ben used when problems with TP.
As you can see it looks in DA as it is enabled for FB, but in the PC8 it says it is disabled and I have try many times
and each time I have press save to the PC8 and after that disconnected the PC8.
And each time I upload setting again the FB connection is remove.
Updated DA to V2.5.227 and screen dump upload to Facebook is working again.
Nice work Srm dev. Team.
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer
Responsabile SRM Italia - Software Developer
Re: New Features - Nuove Caratteristiche
Simone, I tried to install and this is the error I am getting. I tried to install twice and both times this is the message I receive.
You do not have the required permissions to view the files attached to this post.