Se via WiFi non ti carica significa che non hai inserito bene le impostazioni, mi sembra strano che sia un problema generale perché vedo che la gente sta caricando.Cosa significa che il DA ti rosetta l'uscita e non vedi i dettagli delle zone???Cancellara Emulator wrote: ↑Sun Feb 19, 2017 9:02 pmCiao, ho anche io lo stesso problema. GPS settato a 1s ma non funziona. Non so se su Strava c'è la traccia perchè se collego il PC8 al DA (come segnalato altrove, via Wi-Fi non carica nulla), mi resetta l'uscita e non riesco più a leggere i dettagli delle zone: resta solo lo storico. Anche questa è una cosa poco simpatica: col PC7 non accadeva! Ho inviato via mail le impostazioni del PC8 attuali! Grazie.simone wrote: ↑Sun Feb 19, 2017 8:34 pmhai provato a resettare gli eventi del GPS?sciak wrote: ↑Sun Feb 19, 2017 12:58 pm Ciao, ho provato due settaggi, 1s e 5s e con nessuno dei 2 si era riuscito a connettere, la velocità invece era settata su ANT+.
Comunque, una volta a casa, scaricato il file ecc, l'ho messo in balcone con una nuova attività avviata, e dopo un paio di minuti si é connesso al GPS (settato su 5s).
Grazie mille.
PC8 firmware: news - novità
Re: PC8 firmware: news - novità
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer
Responsabile SRM Italia - Software Developer
Re: PC8 firmware: news - novità
Si il gps è settato a 1s , cosa intendi per "restato gli eventi ? Gli orari delle varie uscite erano sta mattina 9:30 che ho fatto riscaldamento poi 10:50 gara e 12:00 deffaticamento e ieri 13:30 e su Strava mi da orari 00:00 /01:50/2:00 di notte solo a me è capita l'orario diverso su Strava ?simone wrote: ↑Sun Feb 19, 2017 8:43 pmMi devi dire e:Spawer wrote: ↑Sun Feb 19, 2017 12:59 pm Ciao a tutti , ho riprovato oggi ,ma niente il segnale gps non ne vuole sapere , ho riprovato più volte a impostare come con nel post dedicato . domani riprovo , che tramite device agent ho selezionato l'impostazione "calibrazione altitudine durante la corsa " vediamo un po. Poi in strava l'orario di partenza e diverso da quello reale , può essere perché non cera segnale gps?? grazie.
1) hai correttamente dettato il GPS ad 1 secondo nel profilo corrente ed hai restato gli eventi
2) che ora avevi all'inizio della attività?
Last edited by Spawer on Mon Feb 20, 2017 1:21 pm, edited 1 time in total.
Re: PC8 firmware: news - novità
Ok, I will make a check!airsnake wrote: ↑Sun Feb 19, 2017 12:44 pm Today I did a ride with 25 Intervalls. The good is that the device count more than 20 Intervalls But there is an issue after the 20th Intervall. Every time when I press the set button the drive time will be reset to 1min and the distance to zero.
In Strava the total distance is the distance from the last interval to the end of the ride also the drive time.
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer
Responsabile SRM Italia - Software Developer
Re: PC8 firmware - feature request
I would like to request the option when choosing power zones/level on PC, or in SRMX software, to choose Coggan iLevels.
Seems this would benefit both coaches and self-coached athletes alike.
More information on iLevels can be found here:
http://home.trainingpeaks.com/blog/arti ... ls-in-wko4
and here:
https://www.youtube.com/watch?v=wTYE1VZewgc
thanks,
Seems this would benefit both coaches and self-coached athletes alike.
More information on iLevels can be found here:
http://home.trainingpeaks.com/blog/arti ... ls-in-wko4
and here:
https://www.youtube.com/watch?v=wTYE1VZewgc
thanks,
Re: PC8 firmware: news - novità
Great! I try it tomorrow. Thanks Simone.simone wrote: ↑Sun Feb 19, 2017 6:23 pmA new firmware is available right now for download. Please test it and let us know.RasmussM wrote: ↑Sun Feb 19, 2017 3:00 pmHI robterliSwRnBk wrote: ↑Sun Feb 19, 2017 6:25 am
Hi Rasmuss,
I got the same issue with power and cadence loss, but with an older firmware last year.
You got to check in the sensor Page of the PM how strong your powermeter transmit the signal.
If it is below 50% im afraid , but you maybe need to send it back to get it fixed.
The important Value is the : PM RSSI
Hope it Helps
See my screenshotIMG_6749.jpg
I will see on next training, but as it has worked with PC8 firmware 2.1.8 I also expect it to work with a newer one.
Simone has already sent it to the dev. team.
-
- Posts: 35
- Joined: Mon Feb 13, 2017 2:10 am
Re: PC8 firmware: news - novità
Tested the latest update this afternoon on the trainer. The PC8 picked up my power2max (classic) but was reading 0 cadence or 0 power. I was unable to get a calibration signal. The Ant+ stick in my laptop had no trouble reading the data.
I haven't tested the new firmware with my SRM unit yet.
I haven't tested the new firmware with my SRM unit yet.
Re: PC8 firmware: news - novità
It works fine with Power2max Type-S, I have just tested on the way to work this morningnicholasmagill wrote: ↑Mon Feb 20, 2017 5:56 am Tested the latest update this afternoon on the trainer. The PC8 picked up my power2max (classic) but was reading 0 cadence or 0 power. I was unable to get a calibration signal. The Ant+ stick in my laptop had no trouble reading the data.
I haven't tested the new firmware with my SRM unit yet.
D e n m a r k
Use with Power2max Type-S and Power2max NG power meter.
-
- Posts: 35
- Joined: Mon Feb 13, 2017 2:10 am
Re: PC8 firmware: news - novità
Hmmm, might try it again just to be sure.Tillquist wrote: ↑Mon Feb 20, 2017 7:02 amIt works fine with Power2max Type-S, I have just tested on the way to work this morningnicholasmagill wrote: ↑Mon Feb 20, 2017 5:56 am Tested the latest update this afternoon on the trainer. The PC8 picked up my power2max (classic) but was reading 0 cadence or 0 power. I was unable to get a calibration signal. The Ant+ stick in my laptop had no trouble reading the data.
I haven't tested the new firmware with my SRM unit yet.
Re: PC8 firmware: news - novità
Ciao
installata nuova versione firmware 2.5.1 mi sembra a un primo approccio che sia peggiorata la rilevazione altitudine di partenza,nel primo beta era ok,qui siamo ritornati alla versione originale del firmware
ciao e complimenti per l'impegno
installata nuova versione firmware 2.5.1 mi sembra a un primo approccio che sia peggiorata la rilevazione altitudine di partenza,nel primo beta era ok,qui siamo ritornati alla versione originale del firmware
ciao e complimenti per l'impegno
Re: PC8 firmware: news - novità
Hi,
since I have updated the FW to 2.5.x I cannot see PowerBalance in TrainingPeaks anymore.
I have tried it with 2 different Quarq PMs. Not tested it yet with my SRM PM on my road-bike.
If I'm using the data-field Leistungs-Balance on the PC8, the value is overtime 50-50%
/ralf
since I have updated the FW to 2.5.x I cannot see PowerBalance in TrainingPeaks anymore.
I have tried it with 2 different Quarq PMs. Not tested it yet with my SRM PM on my road-bike.
If I'm using the data-field Leistungs-Balance on the PC8, the value is overtime 50-50%
/ralf